| Model | OPP-10PV | OPP-15PV | OPP-20PV | OPP-30PV | OPP-40PV | OPP-50PV | OPP-60PV | OPP-75PV | |
| Power (kw) | 7.5 | 11 | 15 | 22 | 30 | 37 | 45 | 55 | |
| Horsepower (hp) | 10 | 15 | 20 | 30 | 40 | 50 | 60 | 75 | |
| Air displacement/ Working pressure (M³/Min. / bar) |
1.2 / 7 | 1.6 / 7 | 2.5 / 7 | 3.8 / 7 | 5.3 / 7 | 6.8 / 7 | 7.4 / 7 | 10.0 / 7 | |
| 1.1 / 8 | 1.5/8 | 2.3/8 | 3.6 / 8 | 5.0 / 8 | 6.2 / 8 | 7.0 / 8 | 9.2 / 8 | ||
| 0.9 / 10 | 1.3 / 10 | 2.1 / 10 | 3.2 / 10 | 4.5 / 10 | 5.6 / 10 | 6.2 / 10 | 8.5 / 10 | ||
| 0.8 / 12 | 1.1 / 12 | 1.9 / 12 | 2.7 / 12 | 4.0 / 12 | 5.0 / 12 | 5.6 / 12 | 7.6 / 12 | ||
| Air out let diameter |
DN20 | DN25 | DN25 | DN25 | DN40 | DN40 | DN40 | DN50 | |
| Lubricating oil volume (L) | 10 | 16 | 16 | 18 | 30 | 30 | 30 | 65 | |
| Noise level dB(A) | 60±2 | 62±2 | 62±2 | 64±2 | 66±2 | 66±2 | 66±2 | 68±2 | |
| Driven method | Direct driven | ||||||||
| Type | PM VSD | ||||||||
| Start method | Variable frequency start | ||||||||
| Length (mm) | 950 | 1150 | 1150 | 1350 | 1500 | 1500 | 1500 | 1900 | |
| Width (mm) | 670 | 820 | 820 | 920 | 1020 | 1020 | 1020 | 1260 | |
| Height (mm) | 1030 | 1130 | 1130 | 1230 | 1310 | 1310 | 1310 | 1600 | |
| Weight (kg) | 250 | 400 | 400 | 550 | 700 | 750 | 800 | 1750 | |
| Model | OPP-100PV | OPP-125F | OPP-150PV | OPP-175PV | OPP-200PV | OPP-275PV | OPP-350PV | |
| Power (kw) | 75.0 | 90 | 110 | 132 | 160 | 200 | 250 | |
| Horsepower (hp) | 100 | 125 | 150 | 175 | 200 | 275 | 350 | |
| Air displacement/ Working pressure (M³/Min. / bar) |
13.4 / 7 | 16.2 / 7 | 21.0 / 7 | 24.5 / 7 | 32.4 / 7 | 38.2 / 7 | 45.5 / 7 | |
| 12.6 / 8 | 15.0 / 8 | 19.8 / 8 | 23.2 / 8 | 30.2 / 8 | 36.9 / 8 | 43 / 8 | ||
| 11.2 / 10 | 13.8 / 10 | 17.4 / 10 | 20.5 / 10 | 26.9 / 10 | 33/ / 10 | 38.9 / 10 | ||
| 10.0 / 12 | 12.3 / 12 | 14.8 / 12 | 17.4 / 12 | 23 / 12 | 28.5 / 12 | 36 / 12 | ||
| Air out let diameter |
DN50 | DN50 | DN65 | DN65 | DN75 | DN90 | DN90 | |
| Lubricating oil volume (L) | 65 | 72 | 90 | 90 | 110 | 130 | 150 | |
| Noise level dB(A) | 68±2 | 70±2 | 70±2 | 70±2 | 75±2 | 85±2 | 85±2 | |
| Driven method | Direct driven | |||||||
| Type | PM VSD | |||||||
| Start method | Variable frequency start | |||||||
| Length (mm) | 1900 | 2450 | 2450 | 2450 | 2760 | 2760 | 2760 | |
| Width (mm) | 1260 | 1660 | 1660 | 1660 | 1800 | 1800 | 1800 | |
| Height (mm) | 1600 | 1700 | 1700 | 1700 | 2100 | 2100 | 2100 | |
| Weight (kg) | 1850 | 1950 | 2200 | 2500 | 2800 | 3100 | 3500 | |
1. Fast response to load
The load reaction action is very fast, the traditional screw machine will affect the reaction speed with the change of processing time during the operation, but this new frequency conversion screw machine will not;
2.Low motor friction
In the structural design of the body, there is no bearing, which effectively avoids the friction between the bearing and the rotor, and there is no need to do too much maintenance on the motor during daily use;
3.High transmission efficiency
This variable frequency permanent magnet screw machine has undergone a great change in transmission, and adopts the direct transmission mode to reduce the energy loss during the transmission process, especially when the main engine and the motor are connected together;
The frequency conversion permanent magnet screw machine has fast response speed, low motor friction, high transmission efficiency, and high use value of the body, especially suitable for large factories.
1. Adopts PLC multilanguage control system, beautiful and intuitive interface, easy to operate function, operators can quickly and easily adjust the compressor.
2. 14 protection functions such as overload protection, short circuit protection, reverse protection, low temperature protection, high voltage protection, etc. to fully protect the unit.
3. The advanced microcomputer control drive system realizes itelligent control, air volume variable speed control, automatic adjustment of load start and soft start. Inelligent dynamic control, dynamic display of the working status of each component of the compressor, visual pressure, temperature, current working curve, etc.
4. Large memory and equipped with printer interface; It can use computer remote monitoring or multiple linkage control between air compressors.
1. The heat exchanger uses high-quality raw materials and a unique intemal channel design, which increases the heat exchange area and can effectively dissipate heat for the air compressor.
2. The inner wall of the heat exchanger is treated with corrosion protection to increase the service life of the heat exchanger and increase the heat transfer effect.
3. The radiator has passed the strict factory test, and the quality is reliable, which efetively prevents the high temperature of the air compressor and increases the service life of the machine.
1. Intake valve is the core component to control the air intake of the air compressor.
2. Adopting the world famous brand air intake valve, it can automatically adjust theair volume by 0-100% according to the requirement of the system air quantity. It promises small pressure loss, stable action and long life consequently reduced operating costs.